Application Fields of PEEK ConnectorsPEEK connectors integrate chemical resistance, electrical properties, abrasion resistance, hydrolysis resistance, and high-temperature resistance, and can be widely applied in fields such as petroleum, medical care, aerospace, electronics and electrical appliance
JUTI keep continuous Strategic Cooperation with SABICJUTAI GM& Deputy GM warmly welcomed Wang Liqiu, the Senior Product Manager of SABIC Greater China, visited JUTAI on 2/28. SABIC, a publicly listed company headquartered in Riyadh, Saudi Arabia, is one of the world's largest petrochemical manufactu
Annual Grand Event for the Plastics and Rubber Industry2024CHINAPLASOpening on 2024/4/23at the National Exhibition and Convention Center (NECC), Shanghai HongqiaoAs a leading enterprise in the domestic new materials industry,JUTAI makes a stunning appearance with series of products of PEEK、PEI、PSU、P
Jutai PEI Hydrogen Energy Bipolar plates Debut in 2024CHFEJutai—PEI (Polyetherimide) bipolar plates—was showcased as a core exhibit by SABIC at the 8th China (Foshan) International Hydrogen Energy and Fuel Cell Technology and Products Expo (CHFE2024). This CHFE2024 covered all segments of the hydrog
On March 11, 2024, Andrew Storm, General Manager of Victrex Greater China, and Rainer Muller, Global Leader for Semi-Finished Products, visited Suzhou Jutai New Materials. The company's General Manager, Xu Zhiyu, and Deputy General Manager, Zhang Huijuan, warmly welcomed the guests and accompanied t
Jutai Obtains Supplier Qualification from SchlumbergerSchlumberger, the global leader in oilfield technology services, stands as the industry giant, providing world-class reservoir characterization, drilling, production, and processing technologies for the oil and gas sector.On June 7, 2024, followi
Availability: | |||||||||
---|---|---|---|---|---|---|---|---|---|
Quantity: | |||||||||
JUTAIPEEK®GF30 ROD, PEEK GF30 ROD is a polyether ether ketone (PEEK) rod profile reinforced with 30% short-cut glass fibers. Compared to unreinforced PEEK rod, this product has significantly improved thermal deformation temperature, enhanced material strength and modulus, better wear resistance, and a lower thermal expansion coefficient.
This product is suitable for high-temperature environments that require resistance to high stress or friction and wear, such as semiconductor processing, precision bearings, mechanical load-bearing components, pressure pipelines and containers in the chemical industry, and electrical systems.
JUTAIPEEK®GF30 ROD, PEEK GF30 ROD is a polyether ether ketone (PEEK) rod profile reinforced with 30% short-cut glass fibers. Compared to unreinforced PEEK rod, this product has significantly improved thermal deformation temperature, enhanced material strength and modulus, better wear resistance, and a lower thermal expansion coefficient.
This product is suitable for high-temperature environments that require resistance to high stress or friction and wear, such as semiconductor processing, precision bearings, mechanical load-bearing components, pressure pipelines and containers in the chemical industry, and electrical systems.
● Good tensile performance, modulus ≥ 6.0 GPa
● Good flexural performance, flexural modulus ≥ 7.0 GPa
● Excellent thermal mechanical load-bearing capacity, thermal deformation temperature greater than 250°C
● Excellent wear resistance plastic
● Excellent dielectric and insulation properties
● Superior dimensional stability plastic, low thermal expansion coefficient
● High temperature performance plastic, suitable for long-term use at 220-240°C
● Good tensile performance, modulus ≥ 6.0 GPa
● Good flexural performance, flexural modulus ≥ 7.0 GPa
● Excellent thermal mechanical load-bearing capacity, thermal deformation temperature greater than 250°C
● Excellent wear resistance plastic
● Excellent dielectric and insulation properties
● Superior dimensional stability plastic, low thermal expansion coefficient
● High temperature performance plastic, suitable for long-term use at 220-240°C
1. Mechanical engineering industry
2. Semiconductor and electronics industry
3. Chemical and petrochemical industries
4. Electrical industry
1. Mechanical engineering industry
2. Semiconductor and electronics industry
3. Chemical and petrochemical industries
4. Electrical industry
Performance | Test Method | Unit | PEEK GF30 |
Color | Eye | / | Grey-Yellow |
Density | ISO1183-1 | g/cm3 | 1.51 |
Tensile Strength | ISO 527-2 | MPa | ≥100 |
Tensile Modulus | ISO 527-2 | GPa | ≥6.0 |
Charpy Impact Strength (Notched) | IS0179 | kJ/m2 | ≥4.5 |
Flexural Strength | ISO 178 | MPa | ≥180 |
Flexural Modulus | ISO 178 | GPa | ≥6.0 |
Rockwell Hardness | ISO 2039-2 | M | ≥100 |
Coeficient of Linear Thermal Expansion | ISO 11359-2 | 10-6/K | ≤50 |
Long-term ServiceTemperature | UL 746B | ℃ | 250 |
Heat DeflectionTemperature | ISO 75-2 | ℃ | ≥230 |
Water Absorption (23℃、water、24h) | ISO 62方法1 | % | ≤0.1 |
Flame Retardancy | UL 94 | / | V-0 |
Volume Resistivity | IEC 62631-3-1 | Q+cm | 1014-1016 |
Performance | Test Method | Unit | PEEK GF30 |
Color | Eye | / | Grey-Yellow |
Density | ISO1183-1 | g/cm3 | 1.51 |
Tensile Strength | ISO 527-2 | MPa | ≥100 |
Tensile Modulus | ISO 527-2 | GPa | ≥6.0 |
Charpy Impact Strength (Notched) | IS0179 | kJ/m2 | ≥4.5 |
Flexural Strength | ISO 178 | MPa | ≥180 |
Flexural Modulus | ISO 178 | GPa | ≥6.0 |
Rockwell Hardness | ISO 2039-2 | M | ≥100 |
Coeficient of Linear Thermal Expansion | ISO 11359-2 | 10-6/K | ≤50 |
Long-term ServiceTemperature | UL 746B | ℃ | 250 |
Heat DeflectionTemperature | ISO 75-2 | ℃ | ≥230 |
Water Absorption (23℃、water、24h) | ISO 62方法1 | % | ≤0.1 |
Flame Retardancy | UL 94 | / | V-0 |
Volume Resistivity | IEC 62631-3-1 | Q+cm | 1014-1016 |
PEEK GF30 Rod Specification | |||||
Diameter x Length | Unit Weight | Diameter x Length | Unit Weight | Diameter x Length | Unit Weight |
10 x 1000 | 0.17 | 10 x 2000 | 0.34 | 10 x 3000 | 0.51 |
12 x 1000 | 0.23 | 12 x 2000 | 0.46 | 12 x 3000 | 0.69 |
15 x 1000 | 0.34 | 15 x 2000 | 0.68 | 15 x 3000 | 1.02 |
20 x 1000 | 0.58 | 20 x 2000 | 1.16 | 20 x 3000 | 1.74 |
25 x 1000 | 0.87 | 25 x 2000 | 1.74 | 25 x 3000 | 2.61 |
30 x 1000 | 1.30 | 30 x 2000 | 2.60 | 30 x 3000 | 3.90 |
35 x 1000 | 1.72 | 35 x 2000 | 3.44 | 35 x 3000 | 5.16 |
40 x 1000 | 2.20 | 40 x 2000 | 4.40 | 40 x 3000 | 6.60 |
50 x 1000 | 3.35 | 50 x 2000 | 6.70 | 50 x 3000 | 10.05 |
60 x 1000 | 4.73 | 60 x 2000 | 9.46 | 60 x 3000 | 14.19 |
70 x 1000 | 6.35 | 70 x 2000 | 12.70 | 70 x 3000 | 19.05 |
80 x 1000 | 8.41 | 80 x 2000 | 16.82 | 80 x 3000 | 25.23 |
90 x 1000 | 10.53 | 90 x 2000 | 21.06 | 90 x 3000 | 31.59 |
100 x 1000 | 12.89 | 100 x 2000 | 25.78 | 100 x 3000 | 38.67 |
PEEK GF30 Rod Specification | |||||
Diameter x Length | Unit Weight | Diameter x Length | Unit Weight | Diameter x Length | Unit Weight |
10 x 1000 | 0.17 | 10 x 2000 | 0.34 | 10 x 3000 | 0.51 |
12 x 1000 | 0.23 | 12 x 2000 | 0.46 | 12 x 3000 | 0.69 |
15 x 1000 | 0.34 | 15 x 2000 | 0.68 | 15 x 3000 | 1.02 |
20 x 1000 | 0.58 | 20 x 2000 | 1.16 | 20 x 3000 | 1.74 |
25 x 1000 | 0.87 | 25 x 2000 | 1.74 | 25 x 3000 | 2.61 |
30 x 1000 | 1.30 | 30 x 2000 | 2.60 | 30 x 3000 | 3.90 |
35 x 1000 | 1.72 | 35 x 2000 | 3.44 | 35 x 3000 | 5.16 |
40 x 1000 | 2.20 | 40 x 2000 | 4.40 | 40 x 3000 | 6.60 |
50 x 1000 | 3.35 | 50 x 2000 | 6.70 | 50 x 3000 | 10.05 |
60 x 1000 | 4.73 | 60 x 2000 | 9.46 | 60 x 3000 | 14.19 |
70 x 1000 | 6.35 | 70 x 2000 | 12.70 | 70 x 3000 | 19.05 |
80 x 1000 | 8.41 | 80 x 2000 | 16.82 | 80 x 3000 | 25.23 |
90 x 1000 | 10.53 | 90 x 2000 | 21.06 | 90 x 3000 | 31.59 |
100 x 1000 | 12.89 | 100 x 2000 | 25.78 | 100 x 3000 | 38.67 |