- ENGAGED IN SPECIAL ENGINEERING PLASTIC PRODUCTS -
English
Connectors and IC sockets Polyphenylene Sulfide GF40 ROD
You are here: Home » Products » PPS » PPS Rod » Connectors and IC sockets Polyphenylene Sulfide GF40 ROD

PRODUCT CATEGORY

LATESE BLOGS

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

Connectors and IC sockets Polyphenylene Sulfide GF40 ROD

Availability:
Quantity:


PPS GF40 ROD is a 40% short-cut glass fiber reinforced polyphenylene sulfide (PPS) rod profile. This product exhibits excellent thermal stability, insulation, and flame retardancy. Compared to unreinforced PPS materials,chemical resistance polyphenylene sulfide offers a significantly higher heat deflection temperature, increased strength and modulus, improved wear resistance, and a lower coefficient of thermal expansion.
This product is suitable for environments with high stress under high temperatures, such as various mechanical load-bearing components, sealing bearing frameworks, and automotive chassis.






● High tensile strength, above 80 MPa;
● High flexural strength, above 135 MPa;
● Excellent thermo-mechanical load capacity, with a heat deflection temperature above 230°C;
● Superior flame resistance and arc resistance;
● Outstanding insulation properties;
● Excellent dimensional stability, with a low coefficient of thermal expansion;
● High heat resistance, suitable for long-term use at 200°C - 220°C.



1. Electronics Industry: Connectors, IC sockets, printed circuit boards, and IC and LSI packaging
2. Electrical Industry: Insulating bases, coil frames, contact switches, fuse holders, and engine components
3. Automotive Industry: Engine and alternator components, fuel pump and ignition device components, carburetor parts, various sensor components, distribution panels, exhaust recirculation valves, and air cold start heater components
4. Mechanical Industry: Various compressor components, valves, computer parts, flow meters, testing equipment parts, copier components, sensors, sprayers, camera parts, and more



PerformanceTest MethodUnitPPSRNAV
ColorEye/Black
DensityISO1183-1g/cm31.66
Tensile StrengthISO 527-2MPa≥80
Tensile ModulusISO527-2GPa≥5.0
Izod Impact Strength(Notched)ISO 180kJ/m2≥6.0
Flexural StrengthISO 178MPa≥135
FlexuralModulusISO 178GPa≥7.0
Coefficient of Linear Thermal ExpansionISO11359-210-6/K≤45
Long-term Service TemperatureUL 746B200-220
Heat Deflection TemperatureISO 75-2≥230
Water Absorption(23℃、Water、24h)ISO 62 method 1%≤0.05
Flame RetardancyUL 94/V-0
Volume ResistivityIEC 62631-3-1Q-cm≥10A14
Dielectric StrengthIEC 60243-1kV/mm≥15
DielectricConstant(1MHz)IEC 62631-2-1/3.8
Dielectric Loss(1MHz)IEC 62631-2-1/4.8*10^-3



PPS Natural Rod Specification
Diameter x
Length
(mm)
Unit Weight
(Kg)
Diameter x
Length
(mm)
Unit Weight
(Kg)
Diameter x
Length
(mm)
Unit Weight
(Kg)
8x10000.1008x20000.2008x30000.300
10x10000.15010x20000.30010x30000.450
12x10000.2212x20000.4412x30000.66
15x10000.3415x20000.6815x30001.02
20x10000.5920x20001.1820x30001.77
25x10000.9325x20001.8625x30002.79
30x10001.3130x20002.6230x30003.93
35x10001.7435x20003.4835x30005.22
40x10002.3240x20004.6440x30006.96
45x10002.9145x20005.8245x30008.73


Previous: 
Next: 
SIGN UP FOR INDUSTRY ALERTS NEWS AND INSIGHTS FROM EQUITA

ABOUT JUTAI

Our current product series including PEEK, PEI, PSU and PPS profiles of sheets, rods, tubes, with a large inventory of standard sizes available. And customization of shape & color & material filled can also supply.

QUICK LINKS

PRODUCTS

CONTACT

1 Building 2, Houying Technology Industrial Park, No.1 Jiangling East Road.
2 Wujiang Economic and Technological Development Zone, Suzhou City, PRC.
  +86-17712498436/+86-51265131882
Copyright © 2024 Suzhou Jutai HPM Co., Ltd. All Rights Reserved. SitemapPrivacy Policy苏ICP备20002525号-2